Mounting With The Plasma Display Ceiling Suspension Hardware (Pdk-5002) - Pioneer PDP-502MX Manual

Speaker System

4.9.4 Mounting with the plasma display ceiling suspension hardware (PDK-5002)

Monitor mount bolt
(supplied with ceiling-
suspension plasma
display mounting
hardware)
Monitor mount bolt
(supplied with ceiling-
suspension plasma display
mounting hardware)
When mounting the plasma display, with the optional speakers attached, to the ceiling suspension hardware, first
attach the speakers to the display with monitor mount bolts, as shown in
monitor mount bolts to fasten the ceiling suspension hardware to the display, using the washers ( 25 mm in outside
diameter) supplied with the original speaker.
Follow the normal mounting procedure to attach the mounting hardware to the display.
Mounting the optional speakers to the display makes it difficult to see the monitor mount bolts. Take care while
performing mounting work.
78
Hole rivet
Figure 2
Figure 2 . Next, referring to Figure 3 ,