Fujitsu IP-900E Hardware User's Manual page 34

Chapter 2 Installation and Connection
2. Desk-top installation
Install IP-900E/IP-900D series referring Section 2.1.3, "Air flow into and out from the
device" and Section 2.1.4, "Open space required around the device" after sticking the four
rubber feet (Rack mounting kit is not required).
Mark for rubber feet
Safety installation instruction:
1) Multiple pile
The maximum 5 IP-900E/IP-900D series can be piled under the
environment
maintenance-ability. When IP-900E/IP-900D series are piled, please fix
them to avoid to fall (Do not cover the air intake.). See Section 2.1.4,
"Open space required around the device" for the installation space.
2) When IP-900E/IP-900D series is installed in a closed or multi-unit rack,
IP-900E/IP-900D series
condition
the operating ambient temperature inside of the rack environment may
be greater than room ambient. Therefore, the consideration should be
given to operate in the environment compatible with the specifications
in Appendix 2.2 "Environment Specifications."
- The consideration for adjustment of the air condition like air
circulation should be given to prevent the internal rack ambient
from exceeding the maximum operating ambient temperature of
IP-900E/IP-900D series.
- The maximum operating ambient temperature for IP-900E/
IP-900D series: 55°C.
specified. Please
20
install considering the