JVC KM-H2500 Manual page 27

1. Press MENU.
2. Press the PERS Wipe Pattern button.
3. Press NEXT until NextBn Func2 is displayed.
4. Press the NextBn Func2 knob to display the
Secondary Function menu.
5. Use the Func knob to select the secondary
function for the NEXT button. You can choose
from the following:
• None — The NEXT button is not assigned a
secondary function.
• GPO — The NEXT button (in combination with
the Wipe Pattern buttons) is used to trigger
GPI outputs.
6. If you selected GPO in the previous step, use the
Bank knob to select which GPI output bank you
wish to control.
Note:
• Only one GPI output bank can be triggered at a
time.
For More Information on...
• GPI usage and configuration, refer to the section
"General Purpose Interface (GPI)" on page 48.
21