Determining The Value Of The Send Alarms By Property; Opening A Previously Saved Mmc Console; Running Ftsmc By Remote Access; Performing Ftsmc Tasks - NEC Express5800/320Ma Administrator's Manual

Performing ftSMC Tasks

Determining the Value of the Send Alarms By Property

1. In ftSMC, expand ftServer (Local) and ftServer Configuration.
2. Click ActiveService Network.
3. In the details pane, check the value of the Send Alarms By property.

Opening a Previously Saved MMC Console

1. Click Start, and then click Run.
2. In the Run window, type mmc in the Open box, and then click OK.
3. In the Console menu, click Open, and then click the name of the previously saved
MMC console.
4. In the Connect dialog box, click Finish.

Running ftSMC by Remote Access

You can run ftSMC from a remote computer by accessing a target system's desktop
from the remote computer. See
for methods you can use to access the system's desktop remotely. Once you have
accessed the system's desktop, perform the procedure described in
Directly on Your Express5800/320Ma System" on page 3-2
Performing ftSMC Tasks
Detailed instructions for using ftSMC are available in the online Help for ftSMC. Before
interacting with ftSMC, observe the following cautions.
!
!

ftSMC Interface

The details
features of the ftSMC interface.
3-6 Express5800/320Ma: System Administrator's Guide
"Remote Access to Your System Desktop" on page 2-5
C A U T I O N
Before using ftSMC to interact with the NEC Technical
Support, perform the tasks described in the
Express5800/320Ma ActiveService Network
Configuration Guide.
C A U T I O N
When working in ftSMC, generally do not change the
configured values of properties unless directed to do so in
documentation or by the NEC Technical Support.
pane, the icons used in ftSMC, and the ftSMC display

Figure 3-3

shows the ftSMC user interface.
"Running ftSMC
to run ftSMC.
refresh options are