Primary I/O Element Diagnostic Test Codes - NEC Express5800/320Ma Administrator's Manual

Online Diagnostic Test Codes
D485
MAC address check.
D497
Test the BMC interface.
D4E1
BMC retry failure.
D502
Test whether the CPU side of the fault tolerant switch ASIC to the primary I/O
element responds to all interrupts.
D503
Test whether the CPU side of the fault tolerant switch ASIC to the primary I/O
element responds to an interrupt.
DE01
On the primary I/O element, retry communication between the BIOS and the
baseboard-management controllers.

Primary I/O Element Diagnostic Test Codes

The following tests are performed on the booting I/O element.
D580
Test the system error-handling interrupt.
D581
Test the SMI interrupt.
D590
Test the NMI interrupt.
D591
Test the INTR interrupt.
D592
Test the A20 interrupt.
D593
Test the NMI.
B-4 Express5800/320Ma: System Administrator's Guide