Winpe; Windows Hotfixes Distributed By Nec Solutions (America), Inc - NEC Express5800/320Ma Administrator's Manual

7. Use your disk-management tool's Delete Volume command to delete the volume
on the original disk you inserted in step 6. When this step is complete, the disk is
set to Unallocated space.
8. Create a mirror of the spare system disk's C: volume on the original disk you
inserted in step 6.
Using Windows Disk Management, right-click the spare system disk's C: volume.
In the shortcut menu, click Add Mirror. A wizard prompts you through the rest of
the mirroring process.
9. When the disk is 100% resynchronized, verify that the original system disk and the
upgraded system disk are healthy, resynching, dynamic, mirrored volumes. Note
that the drives are not duplexed until the resynchronization activity is complete.
10. After all resynchronization activity has finished, verify that all dynamic disks are
healthy, dynamic, mirrored volumes.
11. Start all applications to verify that your system and applications are working
properly.

WinPE

WinPE (Windows Pre-Installation Environment) provides a command shell from which
you can perform system recovery using operating system commands.
To access the WinPE command shell, you must boot from the ExpressBuilder CD (1 of
2). Select the Use WinPE to repair a corrupted hard drive command when the
Express5800/320Ma System software presents that option.
WinPE is recommended for advanced users or administrators only. See Microsoft
documentation for information about WinPE.

Windows Hotfixes Distributed by NEC Solutions (America), Inc.

To create a file that lists the Windows hotfixes distributed with your
Express5800/320Ma System software release and installed on your system by an IPL
or upgrade to the release, use the following procedure.
To obtain a list of Windows hotfixes
1. Insert your ExpressBuilder CD (1 of 2) in the CD-ROM drive.
2. If the Express5800/320Ma System software installation wizard runs automatically
and asks if you want to install Express5800/320Ma System Software, click Cancel.
3. In a command-prompt window, change to a directory in which to save the file.
4. Enter a command in the following format:
dir cddrive:\Bin\Hotfix\*LG* > outputfile
Disaster Recovery
Troubleshooting 5-15