Inserting Or Removing More Than One Disk At A Time; Ftsmc Interface For Storage Enclosures And Subsystems - NEC Express5800/320Ma Administrator's Manual

Hide thumbs Also See for Express5800/320Ma:

Table of Contents

For example, if the system was shut down normally, but it was shut down while

synchronization was in progress, you need to explicitly reactivate the mirror. On the

other hand, if the system shutdown was due to an unexpected event like a power

failure, the disks begin the remirroring process automatically after booting.

Inserting or Removing More Than One Disk at a Time

You may remove disks from or insert disks into the internal storage as needed.

ftSMC Interface for Storage Enclosures and Subsystems

The

Storage Enclosure

EMC

attached storage

Channel Controller node represents the adapter associated with an attached EMC

storage subsystem.

4-22

Express5800/320Ma: System Administrator's Guide

N O T E

Before mirroring system disks with a disk management

tool (such as Windows Disk Management, make sure

either that both disks are plexes of an RDR virtual disk or

that neither disk is. Do not partner RDR and non-RDR

system disks in a mirror. Otherwise, the disks will fully

resynchronize after every reboot.

The boot disks do not require resynchronization if the

RDR disk is the primary boot volume from which the

system is booted.

node represents the internal storage subsystem and the

systems are not directly represented in ftSMC. The Fibre

Table of Contents