Table of Contents
Advertisement
Chapter 2 Preparations
5.
Slowly close the handle.
The tray is locked making a clicking sound.
6.
Check the drive status via definition of the drive LED.
Removing Hot Plug Compatible SATA Hard Disk Drive
1.
Check the drive status via definition of the drive LED.
2.
Back up all server data in the drive.
3.
Unlock the handle of the tray.
Grasp the handle and slowly pull it to remove the drive.
Before discarding or transferring the removed hard disk drive, make sure to erase the data at your own
responsibility.
Note
When you push the drive into the slot, confirm the handle got hooked on the
frame.
Note
To ensure adequate cooling effect, top cover, baffle, expansion slot cover, and
blank should be installed for server operation. If the server supports the hot-
pluggable components, please minimize the opening time of the top cover.
Important
NEC assumes no liability for data leakage should the product be transferred
to a third party without erasing the data.
Note
The saved boot order is cleared when a hard disk drive is added.
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
193
Advertisement
Table of Contents
