Removing Hot Plug Compatible Sas/Sata Drive - NEC Express5800/T120h User Manual

Hide thumbs Also See for Express5800/T120h:
Table of Contents

Advertisement

Chapter 2 Preparations

Removing Hot Plug Compatible SAS/SATA Drive

1.
Confirm the status of the drive from the combination of the LEDs of the hot-plug SAS drive.
2.
Back up all server data in the drive.
3.
Unlock the handle of the tray.
Grasp the handle and slowly pull it to remove the drive.
If you transfer or dispose of the removed hard disk drive, see Chapter 1 (1. Relocation and Storage) in
"Maintenance Guide" to erase data.
Note
To ensure adequate cooling effect, access panel, baffle, expansion slot cover and
blank should be installed for server operation.
If the server supports hot-plug compatible components, please minimize the
opening time of the access panel.
Important
NEC assumes no liability for data leakage should the product be transferred
to a third party without erasing the data.
Note
The saved boot order is cleared when a hard disk drive is added.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices
2.5-inch drive
3.5-inch drive
147

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nec express5800 series

Table of Contents