Chapter 2 Preparations
2.
Install LTO device in the media bay.
For easier cable installation, do not allow LTO device to be placed beyond the rear end of the front end
cage.
3.
Place the supplied cable around the cable pillar.
4.
Connect the connector of the signal/power cable to LTO device.
5.
Connect the power connector of the signal/power cable to the power cable.
6.
Connect the power cable to the motherboard.
7.
Organize the cables using the cable guide etc. of the main unit.
8.
Connect the signal connector of the signal/power cable to the expander card.
112
Express5800/T120h User's Guide
1. Installing Internal Optional Devices