Chapter 2 Preparations
Preparation before installation
Before installing RDX/LTO device, remove the fan mounted in fan bay 1 of the Redundant fan kit and then install
the FAN Blank.
1.
See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
Remove the fan bay of the redundant fan kit.
3.
Remove the fan mounted in fan bay 1.
4.
Install the Fan Blank in fan bay 1.
Install the Fan Blank as its protrusions are fitted into three holes of the fan bay.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices
107