NEC Express5800/T120h User Manual page 122

Chapter 2 Preparations
4. Unfasten the bracket hand screws that secure the blank cover, and remove the brackets.
5. Lift straight up the blank cover on the slot where the PCI card should be installed.
6. Install SSD module in the M.2 SATA SSD installation kit.
(a) Insert the SSD module into the SSD slot of the M.2 SATA SSD installation kit at an angle of 45
degrees, and slowly push it down.
(b) Secure the SSD module on the M.2 SATA SSD installation kit with screws.
(c) To install the second SSD module, repeat the same procedure.
7. Fit the PCI slot to the PCI card terminal, then insert the terminal into the connector firmly.
122
Express5800/T120h User's Guide
1. Installing Internal Optional Devices