Installing Pci Card - NEC Express5800/T120h User Manual

Chapter 2 Preparations
・Refer to the technical guide for the detailed feature of each card.
・We offer various types of riser cards. Depending on the types of riser cards, performance, form and support PCI card
of a slot may be different. Check the compatibilities of PCI cards referring to the list of riser cards.
・In case the performances are different between a PCI slot and a PCI board, the device operates on the lower
performance.
FH: Full height
*3 A maximum of 1 battery can be implemented per device
*4 For external devices
*5 Cable with boots is not supported
*6 The 2.5-inch PCIe SSD installation kit includes two riser cards.

Installing PCI card

Follow these steps.
1. Back up all data in the server.
2. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3. Unfasten the bracket hand screws that secure the blank cover, and remove the brackets.
4. Check the slot where the PCI board should be installed, referring to the table in "Supported PCI Boards
and Installable Slots."
118
Important The surface becomes hot after use so to avoid burns please allow the drive
and internal parts of the system to cool before touching.
Note In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices