Installing Pci Card - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.11.3 Installing PCI card
Install a PCI card to a PCI slot in the following procedure.
1. See steps 1 to 5 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Confirm the installation position with the reference to the table in Chapter 2 (1.11.2 Supported PCI cards
and available slots).
3. Push PCI Retention Latch to unlock the PCI card from PCI slot. Bring down the lever toward rear of the
server, and remove the blank cover.
82
Important
When installing a PCI card, make sure the connector of the card fits the
connector of the slot.
Note
To install the FBU for RAID controller, see Chapter 2 (1.10 Battery / Flash Backup
Unit for RAID Controller).
1
Note
Keep the removed blank cover for future use.
Express5800/T120g User's Guide
1. Installing Internal Optional Devices
2
Advertisement
Table of Contents
