Installing Side Cover - NEC Express5800/T120h User Manual

Chapter 2 Preparations
1.24

Installing Side Cover

When all internal optional devices are installed, attach the server with side cover.
Please have ready a T-15 hexalobular driver.
Place the side cover straight on the unit while pulling up the lever of the side cover, so that it can be
inserted securely into the frame.
At this time, make sure that the each protrusion of the unit is fitted into a corresponding hole in the
lever.
Push down the lever, and slide the side cover until it is completely closed.
Tughten the security screws on the side cover lever with the T-15 Hexalobular screwdriver.
142
Important
For safety reasons, please operate with the device laid on its side.
Express5800/T120h User's Guide
1. Installing Internal Optional Devices