Removing Hot Plug Compatible Sata Hard Disk Drive - NEC Express5800 Series User Manual

Chapter 2 Preparations
1.25.2

Removing Hot Plug Compatible SATA Hard Disk Drive

1. Check the drive status via definition of the drive LED.
2. Back up all server data in the drive.
3. Unlock the handle of the tray.
Grasp the handle and slowly pull it to remove the drive.
If you transfer or dispose of the removed hard disk drive, see Chapter 1 (1. Relocation and Storage) in
Maintenance Guide to erase data.
Note
To ensure adequate cooling effect, top cover, baffle, expansion slot cover, and
blank should be installed for server operation. If the server supports the
hot-pluggable components, please minimize the opening time of the top cover.
Important
NEC assumes no liability for data leakage should the product be transferred
to a third party without erasing the data.
Note
The saved boot order is cleared when a hard disk drive is added.
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices
141