Chapter 2 Preparations
1.19
8x 3.5-inch drive model Optical disk drive kit
8x3.5-inch drive model can be attached to the LFF optical disk drive cage the optical disk drive.
1.19.1
Installing the internal optical disk drive
Please prepare the following before installing the option.
Parts included in the option kit
T-10 hexalobular driver
T-15 hexalobular driver
To install the components, follow these steps.
1.
Back up all data in the server.
2.
See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3.
Remove the iLO service port cable that is connected to the system board.
122
Optical disk drive
Note
In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices
LFF optical disk drive