Chapter 2 Preparations
nd
4.
Attach the 2
5.
See Chapter 2 (1.6 Air Baffle) to install the air baffle.
6.
See Chapter 2 (1.5 Top Cover) to attach the top cover.
7.
Please see Chapter 2 (2. Installation and Connection) in this manual to conduct installation and connection,
and turn the power supply ON.
1.16.3
Removal
The procedure for removal is the reverse of installation.
Re-attach the blank cover if you operate without it attached.
116
Riser Card or 2.5-inch HDD cage (Rear) by reverse process of removal.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Important
Re-attach the blank cover removed to maintain the internal cooling.
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices