Front Bezel; Removing Front Bezel - NEC Express5800 Series User Manual
Express server
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.4
Front Bezel
Remove the front bezel when pressing the POWER switch or removing Top Cover.
1.4.1
Removing Front Bezel
1.
To unlock the bezel, insert the attached Bezel Lock Key into the key slot and turn the key while
pressing it lightly.
2.
Press to the right and unlock the lever seen on the left when you face the front bezel, and pull only the
left side of bezel by about 10 cm toward you. Then, as shown in the diagram, pull the bezel to the left
forward direction with the lock on the left unlocked to remove the bezel from the device.
Note
Be careful not to press the POWER Switch.
Important
If you fail to remove the front bezel properly, the front bezel might be
damaged.
Pay attention not to press the power switch when installing the front bezel.
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices
51
Advertisement
Table of Contents
