NEC Express5800 Series User Manual page 176

Chapter 3 Setup
Category
Security
To make Intel(R)
TXT(Trusted
Execution
Technology), which is
needed for
tboot(Trusted Boot),
enabled
UPS When the server is
Powerlink supplied with power
from UPS, always turn
on the power.
If it is turned off by
using POWER switch,
leave it OFF even
when UPS supplies
power.
Keep the power OFF
even when UPS
supplies power.
*1 The factory setting is that "the Boot Mode menu" is set as "UEFI" and "the X2APCI menu" is set as "Enabled"
176
Description
Install optional TPM kit and set to Enabled in
System Configuration > BIOS/Platform
Configuration (RBSU) > Server Security -
Intel (R) TXT Support.
Set to Always Power On in System
Configuration > BIOS/Platform
Configuration (RBSU) > System Options >
Server Availability - Automatic Power-On
Set to Restore Last Power Stats in System
Configuration > BIOS/Platform
Configuration (RBSU) > System Options >
Server Availability - Automatic Power-On
Set to Always Power Off in System
Configuration > BIOS/Platform
Configuration (RBSU) > System Options >
Server Availability - Automatic Power-On
Express5800/R120h-2E User's Guide
To be changed
2. Description on System Utility
(4/4)
Remark
Do not disable TPM with
the TPM management
module after setting [TXT
Support] to [Enabled] to
start OS. You may not be
able to change [TPM
Support] and [TXT
Support].
In that case, execute [F7:
Load Defaults].
If you connect UPS via
RS232C, make console
redirection setting invalid
from System Utility (set to
Disabled in BIOS Serial
Console Port).