Post Error Messages - NEC Express5800 Series User Manual

Express server
Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 3 Setup
3.
After a while, the following message is displayed on the screen. (The on-screen message
depends on your environment.)
By pressing the function key following messages, you can call the functions below upon
completion of POST.
<F9> key:
<F10> key:
<F11> key:
<F12> key:
Regarding designated utilities, see instruction documents attached to each option board.
Necessary key inputs are different depending on option boards installed, so you are requested to
operate according to messages.
4.
The OS starts when POST is completed.
1.1.2

POST error messages

When POST detects an error, it displays an error message on the screen. For descriptions of error messages,
causes, and countermeasures, see Chapter 3 (1. IML Error Message) in "Maintenance Guide".
Start System Utility. See Chapter 3 (2 Description on System Utility).
Run EXPRESSBUILDER. For details, see Chapter 3 (4. EXPRESSBUILDER and
Starter Pack).
Start Boot Menu. See Chapter 3 (2 Description on System Utility).
Boot from network.
Tips
When no bootable device is connected, the following message is displayed by
terminating POST.
No bootable devices ware detected
Please attach a UEFI bootable device.
System will automatically retry the UEFI Boot Order in x seconds.
Note
Tell the indication displayed on display unit your sales representative. Alarm
messages are useful information for maintenance.
Express5800/R120h-2E User's Guide
1. Turning on the Server
167

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/r120h-2e

Table of Contents