NEC Express5800 Series User Manual page 29

Chapter 1 General Description
・2nd riser card (option) configuration
(1) 1st riser card (Selection option)
Slots for installing full-height PCI cards.
(2) FlexLOM card slot (option)
This is for the additional LAN card that can be
connected to the riser card.
(When installing the N8116-74 riser card)
(3) Serial Port connector (option)
A connector for connecting serial interface
devices.
this cannot directly connect to a network
line.
(4) 2nd riser card (option)
Slot is exist for installing full height and
low-profile PCIe card.
(5) N8181-168 Power Supply Unit
(non-redundant)
(Selection option)
A power supply for supplying the DC power
to the server.
(6) Power Supply Unit1 (Power Supply Slot 1)
(Selection option)
A power supply for supplying the DC power
to the server.
(7) Power Supply Unit2 (Power Supply Slot 2)
(Selection option)
2nd Power Supply Unit.
(8) LAN connector 2
A connector for connecting a network
(1000BASE-T)
(9) LAN connector 1
A connector for connecting a network
(1000BASE-T)
*1：The 2nd riser card (slot 4/5/6) is available only in the 2CPU configuration.
Redundant.
Express5800/R120h-2E User's Guide
4. Names and Functions of Parts
(10) Display connector
A connector for connecting a display.
(11) management LAN connector
A connector which supports
1000BASE-T/100BASE-TX/10BASE-T.
This port cannot be used as standard LAN port
This port is use for only iLO.
(12) USB3.0 connector
Connectors for connecting USB 3.0 interface
devices.
(13) LOM card (optional LAN3, LAN4)
This is an optional LOM card that can be
connected directly to the mother board.
• N8104-193 1000BASE-T connection LOM
card (2ch)
• N8104-194 10GBASE connection LOM card
(SFP+/2ch)
• N8104-195 10GBASE-T connection LOM
card (2ch)
29