Setting A Hot Spare Hard Disk Drive - NEC Express5800 Series Maintenance Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Convenient Features
4.3.3 Setting a hot spare Hard Disk Drive
1.
Connect a Hard Disk Drive to be used as a hot spare drive, and then turn on the server.
2.
Run the LSI Software RAID Configuration Utility.
3.
From the TOP menu, select Objects and then Physical Drive.
The Objects - PHYSICAL DRIVE SELECTION MENU screen appears.
4.
Move the cursor to the Hard Disk Drive to be used as a hot spare drive, and then press the
<Enter> key.
5.
Select Make HotSpare.
6.
Select Yes, and indication of the Hard Disk Drive specified as a hot spare drive changes to
HOTSP.
Connect a Hard Disk Drive
Run the LSI Software RAID Configuration Utility
Set the Hard Disk Drive as a hot spare drive
Exit the LSI Software RAID Configuration Utility
Objects – PHYSICAL DRIVES SELECTION
MENU
PORT #
ONLINE A00-00
0
ONLINE A00-01
1
READY
2
Express5800/B120e-h Maintenance Guide
4. RAID System Configuration
103
Advertisement
Table of Contents
