NEC Express5800 Series Maintenance Manual page 42

Chapter 1 Maintenance
[?] Forgotten my login name and password for Web browser to use the remote management:
→
You can restore the factory-set values including login name and password in the following
procedure:
(1) Run EXPRESSBUILDER from CPU blade.
(2) Select "Tool menu (Normal mode)" – "English".
(3) Select "System Management".
(4) Select "Initialize BMC Data".
(5) Power off the CPU blade.
(6) Remove the CPU blade from Blade Enclosure.
(7) Wait for at least 30 seconds, and install the CPU blade in Blade Enclosure.
42
Important Restoring the factory-set configuration data also clears settings of remote
management you have made on NEC ESMPRO Agent Extension.
Be sure to make a backup copy of settings of remote management by using NEC
ESMPRO Agent Extension or "System Management" in Tools menu of
EXPRESSBUILDER before starting restoration.
Express5800/B120e-h Maintenance Guide
5. Troubleshooting