Executing Rebuilding Manually - NEC Express5800 Series Maintenance Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Convenient Features
4.3.2 Executing rebuilding manually
1.
Replace the Hard Disk Drive and turn on the server.
2.
Run the LSI Software RAID Configuration Utility.
3.
Select Rebuild from the TOP menu.
The Rebuild - PHYSICAL DRIVES SELECTION MENU screen appears.
4.
Move the cursor to a Hard Disk Drive indicated by FAIL to be rebuilt, and then press the space
key to select it.
The character of the selected drive turns pink.
5.
Press the <F10> key after selecting the hard disk.
6.
Selecting Yes starts rebuild process.
Rebuilding completes when the Completed progress bar on the REBUILDING screen reaches
100%.
7.
Press the <Esc> key to return to the TOP menu screen, and then exit the LSI Software RAID
Configuration Utility.
102
Replace the Hard Disk Drive
Run the LSI Software RAID Configuration Utility
Execute rebuilding
Exit the LSI Software RAID Configuration Utility
Rebuild – PHYSICAL DRIVES SELECTION
MENU
PORT #
ONLINE A00-00
0
FAIL
A00-01
1
Express5800/B120e-h Maintenance Guide
4. RAID System Configuration
Advertisement
Table of Contents
