Server - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features

1.2.4 Server

If you move the cursor to Server, the Server menu screen appears. For the menu that has
move the cursor to it and then press the <Enter> key to show its submenus.
The Server menu screen shows the options you can configure and their features. For the menu System
Management, move the cursor to it and then press the <Enter> key to show its submenus.
Option
System Management
Power Control Configuraiton
Assert NMI on PERR
Assert NMI on SERR
FRB-2 Policy
Boot Monitoring
Boot Monitoring Policy
84
Parameter
–
–
Disabled
Enable or disable the feature to detect PCI PERR.
[Enabled]
Disabled
Enable or disable the feature to detect PCI SERR.
[Enabled]
[Retry 3 Times]
Specify how the system should operate if FRB level 2
Disable FRB2 Timer
errors occur.
Always Reset
[Disabled]
Enable or disable the boot monitoring feature and
5-60 minutes
specify the timeout period. To use this feature, install
NEC ESMPRO Agent on Windows. If starting up an OS
on which it is not installed, disable this feature.
[Retry 3 times]
Specify the processing to be done when time-out was
Always Reset
enforced during boot monitoring. This is configurable
only if Boot Monitoring has been enabled.
Retry 3 times resets the server upon the timeout and
attempts to boot OS up to three times.
Always Reset retries booting the OS repeatedly.
Express5800/B120e-h Maintenance Guide
on the left,
Descriptions
–
–
1. System BIOS