NEC Express5800 Series Maintenance Manual page 142

Chapter 3 Appendix
•
Messages displayed on an upper LCD line
BIOS Message on
Upper LCD Line
XX BIOS Rev XXXX
POST Completed Successfully
No Available Memory in System
Error Pause in POST
Entering BIOS SETUP MENU
Waiting for normal temperature
BIOS Updater Running
System Configuration change is
detected
PCI Bus System Error x
(x: number)
PCI Bus Parity Error x
(x: number)
CPU1_DIMMX Uncorrectable
Error (X: number)
CPU2_DIMMX Uncorrectable
Error (X: number)
142
Cause
POST in progress.
POST completes normally.
No available memory is installed.
An error occurred during POST.
Starting up BIOS SETUP MENU.
A temperature abnormality was
detected inside the server.
BIOS update is in progress.
The CPU or memory configuration
has changed since the previous
startup.
A system error occurred in the PCI
bus x.
A parity error occurred in the PCI
bus x.
A correctable error occurred in CPU
#1_DIMM. X: Failed DIMM number
(1-origin)
A correctable error occurred in CPU
#2_DIMM. X: Failed DIMM number
(1-origin)
Express5800/B120e-h Maintenance Guide
1. POST Error Message
Solution
Wait until POST completes.
Wait until booting up completes.
Make sure that the memory is correctly
installed.
Check the error message which appears
on-screen, and take the appropriate action for
each error.
This message will disappear when SETUP
operation is completed.
Lower the room temperature or turn off the
power to cool the server to room temperature
before starting up the server. If this
abnormality continues to occur, check if a fan
has failed. If the same error still continues to
occur, contact your representative.
Wait until BIOS update is completed.
If this message appears even when no
configuration change has been made, contact
your sales representative
Contact your sales representative.
The error was corrected. You may continue
operating the server.
The error was corrected. You may continue
operating the server.