Webbios And Universal Raid Utility - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features
4.5

WebBIOS and Universal RAID Utility

The points to be noted when using the Universal RAID Utility together with the WebBIOS are described below.
（1）
Terms
Some terms are different between the WebBIOS and Universal RAID Utility. Replace the terms as shown in
the table below:
Terms of WebBIOS
Adapter
Virtual Drive
Drive Group
Drive
（2）
Management numbers
The numbers used for RAID Controller information(the management numbers) differ between the WebBIOS
and Universal RAID Utility as shown in the table below.
For details about the differences in management numbers, refer to "Universal RAID Utility User's Guide".
Adapter (RAID Controller)
Virtual Drive (Logical Drive)
Drive group (Disk Array)
Drive (Physical Device)
RAID Controller
Logical Drive
Disk Array
Physical Device
Tips raidcmd is a command provided by the Universal RAID Utility. For details, refer to
"Universal RAID Utility User's Guide".
Item
Starts from 0
Starts from 0
Starts from 0
Starts from 0
Express5800/B120e-h Maintenance Guide
Terms of Universal RAID Utility
RAID Viewer
raidcmd
RAID Controller
Logical Drive
Disk Array
Physical Device
Management numbers
WebBIOS Universal RAID Utility
Starts from 1
Starts from 1
Starts from 1
To be assigned based on an
enclosure that contains the
physical device and its slot
number.
4. RAID System Configuration
109