Chapter 1 Maintenance
7.3
Forced Shutdown
Use this feature when an OS command does not shut down the server, POWER Switch does not turn off the
server, or software reset does not work.
Continue to hold POWER Switch of the server for at least 4 seconds. The power is forcibly turned off.
(To turn on the power back again, wait approximately 30 seconds after turning off the power).
48
Note
If the remote power-on feature is used, cycle the power once to load the OS after the
power has been forcibly turned off, and then turn off the power again by shutting down the
OS.
POWER Switch
(Keep pressing for at
least 4 seconds.)
Express5800/B120e-h Maintenance Guide
DMP
1
RST
2
ID
7. Resetting and Clearing the Server