Boot - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features

1.2.5 Boot

If you move the cursor to Boot, the Boot menu where you can configure the boot order appears.
For details about the options, see the table below.
Option
Boot Configuration
Quiet Boot
Bootup Numlock State
Setup Prompt Timeout
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
CD/DVD ROM Drive BBS
Priorities
Floppy Drive BBS Priorities
Network Drive BBS Priorities
Hard Drive BBS Priorities
88
Parameter
–
Disabled
Enable or disable the feature to display logo during POST.
[Enabled]
When this option is set to Disabled, the results of POST
execution are displayed instead of the NEC logo.
If BIOS Redirection Port is enabled, this option is
shown as Unavailable and inaccessible (the Quiet Boot
feature is always disabled).
On
Enable or disable Numlock feature of keyboard.
[Off]
[0] to 65535
Specify the time until the <F2> is pressed to launch
SETUP in the range between 0 and 65535 seconds.
–
–
These items display the priority of boot devices.
If all of the Boot Options are set to Disabled, the SETUP
–
starts running upon completion of POST.
–
–
–
Specify the boot priority for each BBS (BIOS Boot
Specification).
–
–
–
Express5800/B120e-h Maintenance Guide
Descriptions
–
–
[ ]: Factory settings
1. System BIOS