Lsi Software Raid Configuration Utility And Universal Raid Utility - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features
4.4

LSI Software RAID Configuration Utility and Universal RAID Utility

The points to be noted when using the Universal RAID Utility together with the LSI Software RAID
Configuration Utility are described below.
（1）
Terms
Some terms are different between the LSI Software RAID Configuration Utility and Universal RAID Utility.
Replace the terms as shown in the table below:
Terms of LSI Software RAID Configuration
Adapter
Virtual disk
Array
Physical drive
（2）
Management numbers
The numbers used for RAID Controller information (the management nunbers) differ between the LSI Software
RAID Configuration Utility and Universal RAID Utility as shown in the table below.
For details about the differences in management numbers, refer to "Universal RAID Utility Users Guide".
Adapter (RAID Controller)
Virtual Drive (Logical Drive)
Array (Disk Array)
Physical drive (Physical Device)
Utility
RAID Controller
Logical Drive
Disk Array
Physical Device
Tips
raidcmd is a command provided by the Universal RAID Utility. For details, refer
to "Universal RAID Utility Users Guide".
Item
Starts from 0
Starts from 0
Starts from 0
Starts from 0
Express5800/B120e-h Maintenance Guide
Terms of Universal RAID Utility
RAID Viewer
RAID Controller
Logical Drive
Disk Array
Physical Device
Management numbers
LSI Software RAID
Universal RAID Utility
Configuration Utility
Starts from 1
Starts from 1
Starts from 1
To be assigned based
on an enclosure that
contains the physical
device and its slot
number.
4. RAID System Configuration
raidcmd
107