NEC Express5800 Series Maintenance Manual page 62

Chapter 2 Convenient Features
（2）
Memory Configuration submenu
From the Advanced menu, select Memory Configuration and then press the <Enter> key to display the menu
screen shown below. For the menu that has
key to show its submenus.
For details about the options, see the table below.
Option
Memory Information
Hardware Memory Test
Memory Retest
Memory Frequency Limit
Memory Voltage
NUMA
Memory RAS Mode
62
on the left, move the cursor to it and then press the <Enter>
Parameter
–
[Disabled]
Enable or disable to execute memory test during POST.
Enabled
If a memory error is detected while this option is set to
Enabled, the relevant memory resource is degraded.
[No]
When this option is set to Yes, all DIMMs are
Yes
reconfigured at POST. No is automatically selected after
DIMMs are reconfigured.
[Auto]
Specify the upper limit of operating frequency of
800 MHz
memory. The operating frequency may be lowered than
1066 MHz
the specified value depending on memory configuration.
1333 MHz
1600 MHz
1866 MHz
1.5 V
Specify the operating voltage of memory. The memory
[1.35 V]
voltage may differ from that specified in this parameter
depending on memory configuration, because the
setting may be changed for safe operation of DIMM.
Disabled
Enable or disable Non-Uniform Memory Access feature.
[Enabled]
This option is displayed only in 2-CPU configuration.
[Independent]
Specify the memory RAS mode.
Mirroring
Lock Step
Sparing
Express5800/B120e-h Maintenance Guide
Descriptions
–
1. System BIOS