Boot - NEC Express5800 Series Maintenance Manual

Chapter 2 Useful Features

1.2.5 Boot

Boot menu appears when the cursor is moved to Boot.
For details about the options, see the table below.
Option
Boot Configuration
Quiet Boot
Bootup Numlock State
Setup Prompt Timeout
Boot Mode
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
CD/DVD ROM Drive BBS
Priorities
Floppy Drive BBS Priorities
Network Drive BBS Priorities
Hard Drive BBS Priorities
Parameter
–
Disabled Enables or disables the feature to display the logo during POST.
Disabled: the results of POST execution are displayed instead of the
[Enabled]
NEC logo after the power is turned on.
If BIOS Redirection Port is enabled, this option is shown as Unavailable
and inaccessible (run with Disabled state automatically).
On Enables or disables Numlock.
[Off]
[0] – 65535 Specifies the time until <F2> is pressed to launch SETUP in the range
between 0 and 65535 seconds.
Legacy Specifies the boot mode.
[UEFI] Select UEFI for the following OS:
– Windows Server 2012
– Windows Server 2012 R2
Select Legacy for the following OS:
– Windows Server 2008
– Windows Server 2008 R2
See Chapter 1 Installing Windows in Installation Guide, and determine
the Boot Mode according to description in "Before Starting Setup"
appropriate to your OS.
–
– These items display the priority of boot devices.
If all of the Boot Options are set to Disabled, the SETUP starts running
–
upon completion of POST.
–
–
– Specifies the boot priority for each BIOS Boot Specification (BBS).
–
–
–
Express5800/B120f-h Maintenance Guide
Description
–
–
[ ]: Factory setting
1. System BIOS
85