Operating Procedures For Configuration Utility In Uefi Mode; Create/Add Configuration - NEC Express5800 Series Maintenance Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Useful Features
4.6
Operating Procedures for Configuration Utility in UEFI Mode
4.6.1 Create/Add Configuration
1.
Run LSI Software RAID Configuration Utility.
2.
From the TOP menu screen, select Virtual Drive Management, and then Create Configuration.
3.
For Select RAID Level on the following screen, select the RAID level (RAID0/RAID1).
108
Run LSI Software RAID Configuration Utility
Create/add Virtual Drive
Check the Virtual Drive settings
Initialize Virtual Drive
Install OS and Universal RAID Utility
*1
Perform Consistency Check
Exit LSI Software RAID Configuration Utility
Express5800/B120f-h Maintenance Guide
4. RAID System Configuration
*1 This workflow is not
required if there is an
already-installed Virtual
Drive.
Advertisement
Table of Contents
