NEC Express5800 Series Maintenance Manual page 109

Chapter 2 Useful Features
4. Create a virtual drive. The procedure for creating a new virtual drive is different from that for adding a
virtual drive. Creating a new virtual drive is to create a virtual drive by using a new physical device.
Adding a virtual drive is to create an additional virtual drive by using an unused area of the existing
Drive Group.
The procedures to create the virtual drive in each case are following below.
4-1. New creation
1)
2)
Note Up to eight virtual drives can be created.
On the screen shown in step 3, select "Unconfigured Capacity" of Select Drives From.
Select Select Drives, and then select the device type for Select Media Type.

Note The Both option is not available.

The options for Select Media Type vary depending on the connected device.
Express5800/B120f-h Maintenance Guide
4. RAID System Configuration
109