Utilities In Expressbuilder; Expressbuilder Command Line Interface - NEC Express5800 Series Maintenance Manual

Chapter 2 Useful Features
5.3

Utilities in EXPRESSBUILDER

You can run the following utilities when choosing Utilities from Home Menu.
(1) Starter Pack installation (available only on Internal Flash Memory)
Installs Starter Pack to the installed Windows. Starter Pack is usually installed from Setup of Home Menu or
Autorun menu. Use this feature to install Windows manually without EXPRESSBUILDER DVD.
(2) RAID configuration data
Saves or loads the configuration data on a RAID controller.
(3) File execution
Directly runs an external utility on removable media. Use this feature only for utilities provided by NEC.
(4) Internal Flash Memory (available only on DVD)
Manages Internal Flash Memory with the following commands.
a) Initialize
Clears the data on Internal Flash Memory and initializes (formats) it.
All data on Internal Flash Memory is deleted.
b) Update
Copies the data of EXPRESSBUILDER DVD or other media to Internal Flash Memory.
The data is overwritten and all previous data is cleared.
5.4

EXPRESSBUILDER Command Line Interface

You can operate EXPRESSBUILDER by using Command Line Interface (CLI) on Windows command prompt.
See EXPRESSBUILDER Command Line Interface User's Guide for details.
132
Note
Do not run the file provided by a third party.
Tips

The parameter file and RAID configuration data are retained.

To browse the EXPRESSBUILDER DVD, specify /mnt/usr_connect/cdromX.
(X is numeric)
Express5800/B120f-h Maintenance Guide
5. Details of EXPRESSBUILDER