Table of Contents
Advertisement
Chapter 2 Useful Features
6.3
Utilities in EXPRESSBUILDER
You can run the following utilities when choosing Utilities from Home Menu.
(1) RAID Configuration Data
Saves or loads the configuration data on a RAID controller.
(2) File Execution
Runs directly an external utility on removal media. Use this feature for utilities provided by NEC.
(3) Internal Flash Memory (only available on DVD)
Manages Internal Flash Memory with the following commands.
a) Initialize
Clears the data on Internal Flash Memory and initializes (formats) it.
All data on Internal Flash Memory is deleted.
b) Update
Copies the data of EXPRESSBUILDER DVD or other media to Internal Flash Memory.
The data is overwritten and all previous data is cleared.
(4) Starter Pack installation (only available on Internal Flash Memory)
Installs Starter Pack to the installed Windows. Starter Pack is usually installed from Setup of Home Menu
or Autorun Menu. Use this feature to manually install Windows without EXPRESSBUILDER DVD.
6.4
CLI for EXPRESSBUILDER
You can operate EXPRESSBUILDER by using Command Line Interface (CLI) on Windows command prompt.
For details, see EXPRESSBUILDER Command Line Interface User's Guide.
Note
Do not run the file provided by a third party.
The parameter file and RAID configuration data are retained.
Tips
Starter Pack is automatically installed when Windows is installed by
Tips
EXPRESSBUILDER.
Express5800/R120g-2E, T120g Maintenance Guide
6. Details of EXPRESSBUILDER
185
Advertisement
Table of Contents
