Clearing Bios Settings (Nvram(Cmos Memory)) - NEC Express5800/R120g Maintenance Manual

Chapter 1 Maintenance
7.4

Clearing BIOS Settings (NVRAM(CMOS Memory))

To set the BIOS settings back to the factory settings (clearing NVRAM(CMOS memory)), use the jumper
switch.
You can also clear the password of BIOS Setup Utility (SETUP) by using the jumper switch.
To clear the password or the NVRAM(CMOS memory), use the corresponding jumper switch illustrated in the
figure below.
To clear the password, use the password clear jumper switch. To clear the NVRAM (CMOS memory), use the
CMOS clear jumper switch.
Tips
Use BIOS Setup Utility (SETUP) usually to return the settings to the factory
settings.
Important
Do not change any other jumper switch. Any change will cause the server to
fail or malfunction.
Express5800/R120g-2E, T120g Maintenance Guide
7. Resetting and Clearing the Server
Clear CMOS Jumper
クリアジャンパー
CMOS
クリア
Clear
パスワードクリアジャンパー
Clear Password Jumper
クリア
Clear
53