Chapter 1 Maintenance
10.3
Clearing BIOS Settings (CMOS Memory)
To set the BIOS settings back to the factory settings (clearing CMOS memory), use the jumper switch.
You can also clear the password of BIOS Setup Utility (SETUP) by using the jumper switch.
To clear the password or the CMOS memory, use the corresponding jumper switch illustrated in the figure
below.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
Usually, select Load Setup Defaults in BIOS Setup Utility (SETUP) to return the
Tips
settings to the factory settings.
Important
Do not change any other jumper switch. Any change will cause the server to
fail or malfunction.
10. Resetting and Clearing the Server
105