NEC Express5800/R320g-M4 Maintenance Manual page 206

Chapter 3 Useful Features
For details about the options, see the table below.
Option
Password Configuration
Administrator Password
User Password
Security Configuration
Password On Boot
Disable USB Ports
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
206
Parameter
–
When the <Enter> key is pressed, the password entry
Up to 20 alphanumeric
screen to set administrative right is displayed.
characters
This password can be used to access all SETUP menus.
Password can be set only when SETUP is started by
administrative right. If no password is set, SETUP starts
with administrative right.
When the <Enter> key is pressed, the password entry
Up to 20 alphanumeric
screen to set user right is displayed. With this password,
characters
access to SETUP menus is limited. The user password
can be set when SETUP is started by administrative right
or user right.
–
[Disabled] Enable or disable the feature that requires a password
Enabled entry on boot. This option can be selected when
Administrator Password is set.
[None] Select a USB port to be disabled.
Front
Rear
Front + Rear
Descriptions
–
–
[ ]: Factory settings
1. System BIOS