Problem Of Starting Os - NEC Express5800/R320g-M4 Maintenance Manual

Chapter 1 Maintenance
8.4

Problem of Starting OS

[?] Unable to start OS:
Are hard disk drives properly installed?

 Install hard disk drives properly.
Is the internal SAS cable connected to hard disk drive correctly?

 Connect the SAS cable properly.
Is the EXPRESSBUILDER DVD inserted?

 Eject the EXPRESSBUILDER DVD and retry.
Is a Flash FDD connected to the server?

 Take out the Flash FDD and restart the server.
[?] The server repeats rebooting at startup:
Is CHKDSK run at startup?

 Change to Disabled in the following BIOS setting by using BIOS Setup Utility.
Server - OS Boot Monitoring
For details, see Chapter 3 (1. System BIOS).
* After completion of CHKDSK, restart the server and change the above setting back to
Enabled.
CHKDSK is run in the following conditions:
– CHKDSK is scheduled to be run at next startup.
– Corruption of file system is detected since the previous startup until shutdown.
– Inconsistency (corruption) of file system is detected while mounting at startup.
Is the setting of OS Boot Monitoring appropriate?

 Change the setting of OS Boot Monitoring to suit your system environment. See Chapter 3 (1.
System BIOS) for details.
[?] Unable to work the Wake On LAN feature:
Is the AC power supplied to both CPU/IO modules?

 Supply the AC power to both of CPU/IO modules.
Is the network adapter configured on Windows?

 - Windows Server 2016
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
84
Point to Start – Windows Administrative Tools - Computer management and select
Device Manager (or from start menu, click Windows Administrative Tools – Computer
management and select Device Manager). Double click Stratus emb-I350 2-Port Gigabit
Adapter #n under the network adapter, and then select the following option from
Advanced tab:
"Enable PME" is set to "Enabled".
"Wake On Magic Packet" is set to "Enabled".
8. Troubleshooting