Procedure In The Ft Server Utility - NEC Express5800/R320g-M4 Maintenance Manual

Chapter 1 Maintenance

4.2.3 Procedure in the ft server utility

Follow the steps below to clear the MTBF of component.
1. Choose the target component by using the ft server utility.
2. Check the current state of the target component by selecting View menu  Refresh on the utility.
See 4.2.1 Available Status.
3. Click the Clear button in MTBF Clear of the target component.
4. Start the component.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
30

Tips The MTBF clearing result can be checked by Status of the target component.
 The status is not refreshed automatically. Choose View menu  Refresh on the utility
to check the current status.
Sample screen of PCI Module in ft server utility
4. Maintenance of Express5800/ft series