Bmc Initialization; Bmc Reset - NEC Express5800/R320g-M4 Maintenance Manual

Chapter 3 Useful Features
2.5

BMC Initialization

If you select BMC Initialization on Main menu, the confirmation message as show below appears.
Only the CPU/IO module installed in the server appears on this menu.
<ESC> key: Stops processing and returns to Main menu.
<Enter> key: Initializes BMC configuration settings and restores the default value except for some items.
After initialization, it takes about 3 minutes to restart BMC.
2.6

BMC Reset

If you select BMC Reset : CPU/IO module X on Main menu, the confirmation message as show below appears.
Only the CPU/IO module installed in the server appears on this menu.
<ESC> key: Stops processing and returns to Main menu.
<Enter> key: Resets BMC of CPU/IO module X (X = 0 or 1). It takes about 90 seconds to restart BMC.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
230
Confirmation message (BMC Initialization)
Note Do not shutdown the system, reboot the system, or perform any switch operation
while BMC is being initialized (for approximately 3 minutes).
Confirmation message (BMC Reset)
Note Do not shutdown the system, reboot the system, or perform any switch operation
while BMC is being reset (for approximately 90 seconds).
2. BMC Configuration