NEC Express5800/R320g-M4 Maintenance Manual page 188

Chapter 3 Useful Features
Max Cores
L2 Cache RAM
L3 Cache RAM
Microcode Revision
EMT64
Hyper-Threading
Processor 2 CPUID
Processor Type
Processor Speed
Active Cores
Max Cores
L2 Cache RAM
L3 Cache RAM
Microcode Revision
EMT64
Hyper-Threading
(2)
Memory Configuration submenu
From the Advanced menu, select Memory Configuration and then press the <Enter> key to display the menu
screen shown below. For the menu that has
to show its submenus.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
188
– The maximum number of cores in Processor 1 is displayed.
The secondary cache size of Processor 1 is displayed.
–
The tertiary cache size of Processor 1 is displayed.
–
The revision of the microcode applied to Processor 1 is
–
displayed.
– "Supported" is shown when the processor 1 supports Intel
64 architecture.
– "Supported" is shown when the processor 1 supports
Hyper-Threading Technology.
Number ID of Processor 2 is displayed by a numerical value.
Not Installed Not Installed indicates that no processor is installed in
processor socket 2.
– Type of Processor 2 is displayed.
– Clock speed of Processor 2 is displayed.
The number of active cores in Processor 2 is displayed.
–
– The maximum number of cores in Processor 2 is displayed.
– The secondary cache size of Processor 2 is displayed.
– The tertiary cache size of Processor 2 is displayed.
– The revision of the microcode applied to Processor 2 is
displayed.
– "Supported" is shown when the processor 2 supports Intel
64 architecture.
– "Supported" is shown when the processor 2 supports
Hyper-Threading Technology.
on the left, move the cursor to it and then press the <Enter> key
1. System BIOS
[ ]: Factory settings