Chapter 2 Configuring and Upgrading the System
5.6.2 Removing CPU
Remove the heat sink and CPU in the reverse procedure of installation.
5.6.3 Replacing CPU
Follow the steps below to replace the failed CPU.
1. Identify the failed CPU by viewing Event Log.
2. Remove the CPU/IO module according to Chapter 2 (5.4.1 Removing CPU/IO Module).
3. Install a new heat sink and CPU.
4. See Chapter 2 (5.4.2 Installing CPU/IO Module) and install the CPU/IO module.
5. Start the CPU/IO module from NEC ESMPRO Manager or ft server utility.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
170
Tighten the screws as shown below. (Disassembly order 4, 3, 2, 1)
Important
5. Installing Optional Devices