List Of Windows Event Logs - NEC Express5800/R120g Maintenance Manual

Chapter 3 Appendix
2.

List of Windows Event Logs

OS
Event Log
Source
ID
Timing when an event is logged
All Windows OS
System Event Log
megasas2
11
When starting system
Cdrom
51
When installing an OS
megasas2
129
While the system is running
Megasr1
129
During Consistency Check
Windows Server 2012 R2
System Log
ipoib6x
2
At the time of applying Starter Pack
212
Type Message (Description)
Action
Error The driver detected a controller error on \Device\RaidPort(x).
If the below value is 50 in Details of the event log, this event does not
affect system operation.
<Word style>
0000: 0018000F 00000001 00000000 C004000B
0008: 00000050 00000000 00000000 00000000
0010: 00000000 00000000 00000000 00000000
0018: 00FFFFFF C004000B 00000000 00000000
Error detected on the device \Device\CdRom0 during the paging
Warning
operation.
This event may be registered in the event viewer, but this does not
affect system operation.
Reset command is issued to device \Device\RaidPort(x).
Warning
(Any number replaces x)
This event does not affect system operation If this message is logged
because OS has succeeded retry process.
Warning A Reset command is issued to device \Device\RaidPort0.
This event does not affect system operation If this message is logged
because OS has succeeded retry process.
Error Failed to initialize Mellanox ConnectX IPoIB Adapter.
This event is logged in the system when InfiniBand Adapter is
connected.
This event does not affect the system operation if the following event is
recorded after this event.
Source : ipoib6x
ID : 1
Message : Mellanox ConnectX-3 IPoIB Adapter device has been
Express5800/R120g-2E, T120g Maintenance Guide
successfully initialized and enabled.
2. List of Windows Event Logs