NEC Express5800/R120g Maintenance Manual page 107

Chapter 2 Useful Features
(5) When remote Management Advanced License (*1) is registered
If Remote Management Advanced License is registered, remote media are registered as a bootable device.
Remote media operate as follows:
・AMI Remote CD/DVD devices are registered as the device with the highest priority in "CD/DVD
Priorities."
・If "Load Setup Defaults" in the Save & Exit menu is executed, AMI Remote CD/DVD devices are
registered as the device with the highest priority in "CD/DVD Priorities."
(*1) See EXPRESSSCOPE Engine 3 User's Guide for details of Remote Management Extended
License.
Tips
•
If the boot mode is UEFI, information about the device that the installed OS
has registered is displayed in "HDD Priorities." The model number of the hard
disk may be granted. The partition information storing EFI boot image may be
granted to "Removable Priorities."
•
When the BIOS settings (NVRAM) are cleared when the boot mode is UEFI,
BIOS registers the device information that is displayed in "HDD Priorities"
again. For this reason, the device information may be different from the one
that the installed OS has registered. However, booting can be done
successfully.
• If the boot mode is "Legacy," the model number of the hard disk is displayed
in "HDD Priorities."
• Change bootable devices not by the bcdedit command of Windows or efibootmgr
command of Linux, but from SETUP.
Express5800/R120g-2E, T120g Maintenance Guide
1. System BIOS
107