Table of Contents
Advertisement
Chapter 1 Maintenance
•
Clearing a password
1. Turn off the server, and disconnect the AC power cord from outlet.
See Getting Started or Chapter 2 (1. Installing Internal Optional Devices) in User's Guide to remove
Top Cover or Side Cover.
2. Confirm the position of Clear Password Jumper.
3. Change the jumper switch from Protect to Clear.
4. Reassemble the server and press POWER Switch to turn on the server.
5. POST halts with the following error message.
ERROR
8007: Password Cleared By Jumper.
Press<F1> to resume, <F2> to Setup
6. Turn off the server and return the jumper switch to Protect by following steps 1 and 2.
7. Reassemble the server.
Express5800/R120g-2E, T120g Maintenance Guide
7. Resetting and Clearing the Server
55
Advertisement
Table of Contents
