NEC Express5800/R120g Maintenance Manual page 201

Chapter 3 Appendix
Error Message
Expansion ROM not
initialized - PCI
B005
Slot 05
B022 Serial Port Configuration
Overlapped.
B030 PCI System Error on
Bus/Device/Function
B040 PCI Parity Error on
Bus/Device/Function
B201 Onboard LAN 1 – PCIe Link
Failure
B202 Onboard LAN 2 – PCIe Link
Failure
B211 PCI Slot 01 - PCIe Link
Failure
B212 PCI Slot 02 - PCIe Link
Failure
PCI Slot 03 - PCIe Link
Failure
B213
PCI Slot 04 - PCIe Link
Failure
B214
PCI Slot 05 - PCIe Link
Failure
B215
B221 Onboard LAN 1 PCIe Link
Width Error
B222 Onboard LAN 2 PCIe Link
Width Error
B231 PCI Slot 01 - PCIE Link Width
Error
B232 PCI Slot 02 - PCIE Link Width
Error
PCI Slot 03 - PCIE Link Width
Error
B233
PCI Slot 04 - PCIE Link Width
Error
B234
PCI Slot 05 - PCIE Link Width
Error
B235
B261 Onboard LAN 1 – PCIe Link Speed
Error
B262 Onboard LAN 2 – PCIe Link Speed
Error
B271 PCI Slot 01 - PCIe Link Speed
Error
B272 PCI Slot 02 - PCIe Link Speed
Error
B273 PCI Slot 03 - PCIe Link Speed
Error
PCI Slot 04 - PCIe Link Speed
Error
B274
PCI Slot 05 - PCIe Link Speed
Error
B275
Cause
Option ROM expansion in PCI
slot 05 failed.
Overlapping serial port
configuration was detected.
PCI SERR was detected.
PCI PERR was detected.
Connection failure of PCIe bus
was detected on onboard
LAN1.
Connection failure of PCIe bus
was detected on onboard
LAN2.
Connection failure of PCIe bus
was detected on PCI slot 01.
Connection failure of PCIe bus
was detected on PCI slot 02.
Connection failure of PCIe bus
was detected on PCI slot 03.
Connection failure of PCIe bus
was detected on PCI slot 04.
Connection failure of PCIe bus
was detected on PCI slot 05.
A Link Width error was detected
on Onboard LAN 1.
A Link Width error was detected
on Onboard LAN 2.
A Link Width error was detected
in PCI Slot 01.
A Link Width error was detected
in PCI Slot 02.
A Link Width error was detected
in PCI Slot 03.
A Link Width error was detected
in PCI Slot 04.
A Link Width error was detected
in PCI Slot 05.
Link Speed error was detected
on onboard LAN1.
Link Speed error was detected
on onboard LAN2.
Link Speed error was detected
on PCI Slot 01.
Link Speed error was detected
on PCI Slot 02.
Link Speed error was detected
on PCI Slot 03.
Link Speed error was detected
on PCI Slot 04.
Link Speed error was detected
on PCI Slot 05.
Express5800/R120g-2E, T120g Maintenance Guide
Solution
Disable expansion of option ROM of the option
board that is not used for OS boot.
Run SETUP, and select Advanced → PCI
Configuration → PCI Device Controller and
Option ROM Settings → PCIxx Slot Option
ROM → Disabled. (xx: PCI slot number)
Start SETUP, select Advanced → Serial Port
Configuration, and specify the setting again in a
way that the values of Base I/O or Interrupt in
Serial Port A and Serial Port B will not be the
same.
Contact your sales representative.
1. POST Error Message
201