NEC Express5800 Series Maintenance Manual page 63

Chapter 2 Useful Features
(5)
Storage Configuration Submenu
On Advanced, choose SATA Configuration and then press <Enter> key to display the menu screen shown
below. For the menu that has
submenus.
For details about the options, see the table below.
Option
SATA Information
SATA Mode
Hard Disk Pre-Delay
Onboard SATA RAID Oprom
on the left, move the cursor to it and then press <Enter> key to show its
Parameter
–
Disabled Set SATA Mode.
IDE Mode
AHCI Mode
[RAID Mode]
[Disabled] Specify the delay time before HDD is accessed during POST.
3 Seconds
6 Seconds
9 Seconds
12 Seconds
15 Seconds
21 Seconds
30 Seconds
Disable Enable or disable the option ROM scan for onboard SATA RAID.
[Enable]
Express5800/B120f-h Maintenance Guide
Description
[ ]: Factory setting
1. System BIOS
63